Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.
Topology
–
asks
–
VLANS 35 and 45 have been configured in all three switches. All physical connectivity has been installed and verified All inter-switch links must be operational.
1. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for 802.1q trunking allowing all VLANS
2. Configure the inter-switch links on SW-1 e0/2, SW-2 e0/2, and SW-3 e0/0 and e0/1 to use native VLAN 35
3. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for link aggregation SW-1 should immediately negotiate LACP and SW-2 must only respond to LACP requests
What is a characteristic of a Layer 2 switch?
- A. provides a single broadcast domain for all connected devices
- B. tracks the number of active TCP connections
- C. offers one collision domain for all connected devices
- D. makes forwarding decisions based on MAC addresses
How does MAC learning function?
- A. enabled by default on all VLANs and interfaces
- B. increases security on the management VLAN
- C. sends frames with unknown destinations to a multicast group
- D. inspects and drops frames from unknown destinations
DRAG DROP
–
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
How does MAC learning function?
- A. restricts ports to a maximum of 10 dynamically-learned addresses
- B. increases security on the management VLAN
- C. drops received MAC addresses not listed in the address table
- D. associates the MAC address with the port on which it is received
What is represented in line 3 within this JSON schema?
- A. object
- B. key
- C. value
- D. array
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.
Topology
–
Tasks
–
R1 has been pre-configured with all the necessary commands. All physical cabling is in place and verified. Connectivity for PC1 and PC2 must be established to the switches, and each port must only allow one VLAN.
1. Configure SW-1 with VLAN 35 and label it exactly as SALES
2. Configure SW-2 with VLAN 39 and label it exactly as MARKETING
3. Configure the switch port connecting to PC1
4. Configure the switch port connecting to PC2
5. Configure SW-1 and SW-2 for universal neighbor discovery using the industry standard protocol and disable it on the interface connecting to PC1
Which interface condition is occurring in this output?
- A. broadcast storm
- B. queueing
- C. bad NIC
- D. duplex mismatch
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.
Topology
–
Tasks
–
R1 and R2 are pre-configured with all the necessary commands. All physical cabling is in place and verified. Connectivity for PC1 and PC2 must be established to the switches; each port must only allow one VLAN and be operational.
1. Configure SW-1 with VLAN 15 and label it exactly as OPS
2. Configure SW-2 with VLAN 66 and label it exactly as ENGINEERING
3. Configure the switch port connecting to PC1
4. Configure the switch port connecting to PC2
5. Configure the E0/2 connections on SW-1 and SW-2 for neighbor discovery using the vendor-neutral standard protocol and ensure that E0/0 on both switches uses the Cisco proprietary protocol
What is a characteristic of a Layer 2 switch?
- A. responsible for sending data in a particular sequence
- B. uses routers to create collision domains
- C. avoids MAC address storage for faster transmission
- D. uses the data link layer for communications