Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Which standard is required when more than one distribution system port and only one IP address are configured for a Cisco WLC?
- A. 802.3ad
- B. 802.1q
- C. 802.1d
- D. 802.1af
Refer to the exhibit. The switch cat9k-acc-1 connects users to the campus LAN. Printing services are inaccessible through the network. Which interface issue is causing the connectivity problems?
- A. A bad checksum is causing Ethernet frames to drop.
- B. Excessive collisions are causing dropped frames.
- C. A large number of broadcast packets are resulting in a port reset.
- D. The interface output queue cannot process the Ethernet frames.
Which type of protocol is VRRP?
- A. allows two or more routers to act as a default gateway
- B. uses Cisco-proprietary First Hop Redundancy Protocol
- C. uses a destination IP address 224.0.0.102 for router-to-router communication
- D. uses dynamic IP address assignment
How does a network administrator securely manage an AP in lightweight mode?
- A. using the AP GUI via an in-band SSH connection
- B. using the CLI via an out-of-band connection
- C. using the CLI via a virtual interface with SSH
- D. using the WLC GUI via HTTPS
Refer to the exhibit. An administrator is configuring a new WLAN for a wireless network that has these requirements:
• Dual-band clients that connect to the WLAN must be directed to the 5-GHz spectrum.
• Wireless clients on this WLAN must be able to apply VLAN settings on the returned RADIUS attributes.
Which two actions meet these requirements? (Choose two.)
- A. Enable the Client Band Select option.
- B. Enable the Coverage Hole Detection option.
- C. Enable the Allow AAA Override option.
- D. Set the MFP Client Protection option to Required.
- E. Enable the Aironet IE option
Refer to the exhibit. A packet sourced from 172.18.33.2 is destined for 172.18.32.38. Where does the router forward the packet?
- A. 10.1.1.1
- B. 10.1.1.3
- C. Loopback0
- D. GigabitEthernet0/0
Refer to the exhibit. The router R1 is in the process of being configured. Routers R2 and R3 are configured correctly for the new environment. Which two commands must be configured on R1 for PC1 to communicate to all PCs on the 10.10.10.0/24 network? (Choose two.)
- A. ip route 10.10.10.0 255.255.255.0 192.168.2.3
ip route 10.10.10.10 255.255.255.255 192.168.2.2 - B. ip route 10.10.10.0 255.255.255.0 192.168.2.2
ip route 10.10.2.2 255.255.255.255 10.10.10.10 - C. ip route 10.10.10.0 255.255.255.0 192.168.2.3
ip route 10.10.10.8 255.255.255.252 g0/0 - D. ip route 10.10.10.0 255.255.255.248 192.168.2.2
ip route 10.10.2.8 255.255.255.252 g0/1
What is a reason why an administrator would choose to implement an automated network management approach?
- A. Enable “box by box” configuration and deployment.
- B. Decipher simple password policies.
- C. Reduce inconsistencies in the network configuration.
- D. Increase recurrent management costs.
Which encryption mode is used when a packet is sent from a site-to-site VPN connection where the source and destination IP address portion of a packet is unencrypted?
- A. PPTP
- B. Secure Shell
- C. Transport
- D. PPPoE
Which device protects an internal network from the Internet?
- A. router
- B. firewall
- C. access point
- D. Layer 2 switch