Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Which interface on the WLC is limited to one when LAG is in use?
- A. service
- B. virtual
- C. trunk
- D. AP-manager
Which protocol does a REST API use to communicate?
- A. SSH
- B. STP
- C. SNMP
- D. HTTP
Which cable type must be used when connecting a router and switch together using these criteria?
• Pins 1 and 2 are receivers and pins 3 and 6 are transmitters.
• Auto detection MDI-X is unavailable.
- A. crossover
- B. rollover
- C. console
- D. straight-through
Refer to the exhibit. Which IP route command created the best path for a packet destined for 10.10.10.3?
- A. ip route 10.10.0.0 255.255.252.0 g0/0
- B. ip route 10.10.10.0 255.255.255.240 g0/0
- C. ip route 10.0.0.0 255.0.0.0 g0/0
- D. ip route 10.10.10.1 255.255.255.255 g0/0
Refer to the exhibit. PC A is communicating with another device at IP address 10.227.151.255. Through which router does router Y route the traffic?
- A. router A
- B. router B
- C. router C
- D. router D
What does a switch search for in the CAM table when forwarding a frame?
- A. source MAC address and aging time
- B. destination MAC address and flush time
- C. source MAC address and source port
- D. destination MAC address and destination port
Which interface IP address serves as the tunnel source for CAPWAP packets from the WLC to an AP?
- A. service
- B. trunk
- C. AP-manager
- D. virtual AP connection
Which components are contained within a virtual machine?
- A. physical resources, including the NIC, RAM, disk, and CPU
- B. configuration files backed by physical resources from the Hypervisor
- C. applications running on the Hypervisor
- D. processes running on the Hypervisor and a guest OS
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.
Topology
–
Tasks
–
Refer to the topology. All physical cabling is in place. Routers R3 and R4 are fully configured and inaccessible. Configure static routes for various connectivity to the ISP and the LAN, which
resides on R4.
1. Configure a default route on R2 to the ISP
2. Configure a default route on R1 to the ISP
3. Configure R2 with a route to the Server at 10.0.41.10
4. Configure R1 with a route to the LAN that prefers R3 as the primary path to the LAN
Answer:
Refer to the exhibit. The IPv6 address for the LAN segment on router R2 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router?
- A. 2001:db8:d955:1008:12D8:BAFE:FF01:1
- B. 2001:db8:d955:1008:4598:785F:FE25:1
- C. 2001:db8:d955:1008:1030:ABFF:FECC:1
- D. 2001:db8:d955:1008:10D8:BAFF:FEC2:1