Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
How does MAC learning function on a switch?
- A. associates the MAC address with the port on which it is received
- B. rewrites the source and destination MAC address
- C. broadcasts frames to all ports without queueing
- D. sends an ARP request to locate unknown destinations
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened
Topology
–
Tasks
–
All physical cabling is in place. A company plans to deploy 16 new sites. The sites will utilize both IPv4 and IPv6 networks.
1. Subnet 172.16.0.0/16 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet
– Assign the first usable IP address to e0/0 on Sw101
– Assign the last usable IP address to e0/0 on Sw102
2. Subnet 2001:DB8::/50 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet
– Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw101
– Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw102
Answer:
In which circumstance would a network architect decide to implement a global unicast subnet instead of a unique local unicast subnet?
- A. when the subnet must be available only within an organization
- B. when the subnet does not need to be routable
- C. when the addresses on the subnet must be equivalent to private IPv4 addresses
- D. when the subnet must be routable over the internet
An Ethernet frame arrived at switch interface G0/1, but the destination MAC address is missing from the MAC address table. How does the switch process the frame?
- A. It sends an ARP request to attempt to locate the destination
- B. It updates the destination to FFFF.FFFF.FFFF.
- C. It drops the frame and notifies the sending host.
- D. It floods the frame out of the remaining switch interfaces.
Refer to the exhibit. What is the cause of the issue?
- A. shutdown command
- B. wrong cable type
- C. STP
- D. port security
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices:
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened
Topology
–
Tasks
–
All physical cabling is in place. Routers R3 and R4 are fully configured and inaccessible. Configure static routes for various connectivity to the ISP and the LAN that resides on R4.
1. Configure a route on R1 to ensure that R1 prefers R2 when traffic is destined to the server only.
2. Configure a default route on R2 to the ISP
3. Configure a route on R1 to ensure that R1 will use R2 for the R4 LAN if the link fails between R3 and R4
4. Configure a route on R1 to ensure that R1 prefers R3 when traffic is destined to the R4 LAN at 10.0.41.0/24
Answer:
Refer to the exhibit. Users at a branch office are experiencing application performance issues, poor VoIP audio quality, and slow downloads. What is the cause of the issues?
- A. QoS queuing
- B. interface configuration
- C. broadcast storm
- D. overutilization
Refer to the exhibit. The IPv6 address for the LAN segment on router R1 must be configured using the EUI-64 format. When configured which Ipv6 address Is produced by the router?
- A. 2001:db8:1006:1968:4564:877F:FE99:1
- B. 2001:db8:1006:1968:1119:BEFF:FE67:1
- C. 2001:db8:1006:1968:1130:ABFF:FECC:1
- D. 2001:db8:1006:1968:12D8:BAFE:FF01:1
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened
Topology
–
Tasks
–
R1 has been pre-configured with all the necessary commands. All physical cabling is in place and verified. Connectivity from PC1, PC3, and the Server must be established to the switches, and each port must only allow one VLAN.
1. Configure the VLAN connecting to the switch port for PC3 with the name “SALES”
2. Configure the switch port connecting to Server1
3. Configure the switch port connecting to PC3
4. Ensure R1 discovers SW-1 via the Cisco proprietary neighbor discovery protocol and all other devices on the network are unable to discover SW-1
Answer:
Refer to the exhibit. A packet sourced from 172.16.32.254 is destined for 172.16.32.8. What is the subnet mask of the preferred destination route?
- A. 255.255.224.0
- B. 255.255.255.0
- C. 255.255.255.192
- D. 255.255.255.252