
Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
DRAG DROP
–
Drag and drop the Qos features from the left onto the corresponding statements on the right.

What is the purpose of classifying network traffic in QoS?
- A. configures traffic-matching rules on network devices
- B. services traffic according to its class
- C. identifies the type of traffic that will receive a particular treatment
- D. writes the class identifier of a packet to a dedicated field in the packet header
Which two transport layer protocols carry syslog messages? (Choose two.)
- A. IP
- B. RTP
- C. TCP
- D. UDP
- E. ARP
A DHCP pool has been created with the name CONTROL. The pool uses the next to last usable IP address as the default gateway for the DHCP clients. The server is located at 172.16.32.15. What is the next step in the process for clients on the 192.168.52.0/24 subnet to reach the DHCP server?
- A. ip helper-address 172.16.32.15
- B. ip default-gateway 192.168.52.253
- C. ip forward-protocol udp 137
- D. ip detault-network 192.168.52.253
What are two features of the DHCP relay agent? (Choose two.)
- A. assigns DNS locally and then forwards request to DHCP server
- B. minimizes the necessary number of DHCP servers
- C. permits one IP helper command under an individual Layer 3 interface
- D. is configured under the Layer 3 interface of a router on the client subnet
- E. allows only MAC-to-IP reservations to determine the local subnet of a client
Which DSCP per-hop forwarding behavior is divided into subclasses based on drop probability?
- A. expedited
- B. default
- C. assured
- D. class-selector
DRAG DROP
–
Drag and drop the SNMP components from the left onto the descriptions on the right.

Which IP header field is changed by a Cisco device when QoS marking is enabled?
- A. ECN
- B. Header Checksum
- C. Type of Service
- D. DSCP

Refer to the exhibit. Which command set configures ROUTER-1 to allow Internet access for users on the 192.168.1.0/24 subnet while using 209.165.202.129 for Port Address Translation?
- A. ip nat pool CCNA 192.168.0.0 192.168.1.255 netmask 255.255.255.0access-list 10 permit 192.168.0.0 0.0.0.255
ip nat inside source list 10 pool CCNA overload - B. ip nat pool CCNA 209.165.202.129 209.165.202.129 netmask 255.255.255.255access-list 10 permit 192.168.1.0 255.255.255.0
ip nat inside source list 10 pool CCNA overload - C. ip nat pool CCNA 192.168.0.0 192.168.1.255 netmask 255.255.255.0access-list 10 permit 192.168.0.0 255.255.255.0
ip nat inside source list 10 pool CCNA overload - D. ip nat pool CCNA 209.165.202.129 209.165.202.129 netmask 255.255.255.255access-list 10 permit 192.168.1.0 0.0.0.255
ip nat inside source list 10 pool CCNA overload
The clients and DHCP server reside on different subnets. Which command must be used to forward requests and replies between clients on the 10.10.0.1/24 subnet and the DHCP server at 192.168.10.1?
- A. ip route 192.168.10.1
- B. ip dhcp address 192.168.10.1
- C. ip default-gateway 192.168.10.1
- D. ip helper-address 192.168.10.1