Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
What are two purposes of HSRP? (Choose two.)
- A. It provides a mechanism for diskless clients to autoconfigure their IP parameters during boot.
- B. It improves network availability by providing redundant gateways.
- C. It groups two or more routers to operate as one virtual router.
- D. It passes configuration information to hosts in a TCP/IP network.
- E. It helps hosts on the network to reach remote subnets without a default gateway.
Which type of IPv4 address type helps to conserve the globally unique address classes?
- A. loopback
- B. multicast
- C. private
- D. public
Refer to the exhibit. According to the output, which parameter set is validated using the routing table of R7?
- A. R7 is missing a gateway of last resort.
R7 is receiving routes that were redistributed in EIGRP.
R7 will forward traffic destined to 10.90.8.0/24. - B. R7 has a gateway of last resort available.
R7 is receiving routes that were redistributed from BGP.
R7 will drop traffic destined to 10.90.8.0/24. - C. R7 is missing a gateway of last resort.
R7 is receiving routes that were redistributed from BGP.
R7 will forward traffic destined to 10.90.8.0/24. - D. R7 has a gateway of last resort available.
R7 is receiving routes that were redistributed in EIGRP.
R7 will drop traffic destined to 10.90.8.0/24.
- A. ipv6 address 2001:DB8:D8D2:1009:10A0:ABFF:FECC:1 eui-64
- B. ipv6 address 2001:DB8:D8D2:1009:1230:ABFF:FECC:1 eui-64
- C. ipv6 address 2001:DB8:D8D2:1009:4331:89FF:FF23:9 eui-64
- D. ipv6 address 2001:DB8:D8D2:1009:12A0:AB34:FFCC:1 eui-64
Refer to the exhibit. A packet that is sourced from 172.16.3.254 is destined for the IP address of GigabitEthernet0/0/0. What is the subnet mask of the destination route?
- A. 0.0.0.0
- B. 255.255.254.0
- C. 255.255.255.0
- D. 255.255.255.255
An engineer must configure the IPv6 address 2001:0db8:0000:0000:0700:0003:400F:572B on the serial0/0 interface of the HQ router and wants to compress it for easier configuration. Which command must be issued on the router interface?
- A. ipv6 address 2001:db8::700:3:400F:572B
- B. ipv6 address 2001:db8:0::700:3:4F:572B
- C. ipv6 address 2001::db8:0000::700:3:400F:572B
- D. ipv6 address 2001:0db8::7:3:4F:572B
What is a similarity between global and unique local IPv6 addresses?
- A. They use the same process for subnetting.
- B. They are part of the multicast IPv6 group type.
- C. They are routable on the global internet.
- D. They are allocated by the same organization.
Refer to the exhibit. A network engineer executes the show ip route command on router D. What is the next hop to network 192.168.1.0/24 and why?
- A. The next hop is 10.0.2.1 because it uses distance vector routing.
- B. The next hop is 10.0.0.1 because it has a higher metric.
- C. The next hop is 10.0.2.1 because it is a link-state routing protocol.
- D. The next hop is 10.0.0.1 because it has a better administrative distance.
Why is a first-hop redundancy protocol implemented?
- A. to enable multiple switches to operate as a single unit
- B. to provide load-sharing for a multilink segment
- C. to prevent loops in a network
- D. to protect against default gateway failures
What is the benefit of using FHRP?
- A. reduced ARP traffic on the network
- B. balancing traffic across multiple gateways in proportion to their loads
- C. higher degree of availability
- D. reduced management overhead on network routers