Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
DRAG DROP
–
Drag and drop the device behaviors from the left onto the matching HSRP state on the right.
Refer to the exhibit. A network engineer must configure the link with these requirements:
• Consume as few IP addresses as possible.
• Leave at least two additional useable IP addresses for future growth.
Which set of configurations must be applied?
- A. R1(config-if)#ip address 10.10.10.1 255.255.255.252
R2(config-if)#ip address 10.10.10.2 255.255.255.252 - B. R1(config-if)#ip address 10.10.10.1 255.255.255.240
R2(config-if)#ip address 10.10.10.12 255.255.255.240 - C. R1(config-if)#ip address 10.10.10.1 255.255.255.248
R2(config-if)#ip address 10.10.10.4 255.255.255.248 - D. R1(config-if)#ip address 10.10.10.1 255.255.255.0
R2(config-if)#ip address 10.10.10.5 255.255.255.0
Refer to the exhibit. With which metric does router R1 learn the route to host 172.16.0.202?
- A. 90
- B. 110
- C. 32445
- D. 3184439
Refer to the exhibit. A network engineer must configure router R1 with a host route to the server. Which command must the engineer configure?
- A. R1(config)#ip route 10.10.10.10 255.255.255.255 192.168.0.2
- B. R1(config)#ip route 10.10.10.0 255.255.255.0 192.168.0.2
- C. R1(config)#ip route 0.0.0.0 0.0.0.0 192.168.0.2
- D. R1(config)#ip route 192.168.0.2 255.255.255.255 10.10.10.10
DRAG DROP
–
Refer to the exhibit. A public IPv6 address must be configured for internet access. Which command must be configured on the R2 WAN interface to the service provider?
- A. ipv6 address fe80::/10
- B. ipv6 address 2001:db8:433:37:7710:ffff:ffff:ffff/64 anycast
- C. ipv6 address 2001:db8:123:45::4/64
- D. ipv6 address fe80::260:3EFF:FE11:6770 link-local
Refer to the exhibit. Which two values does router R1 use to determine the best path to reach destinations in network 1.0.0.0/8? (Choose two.)
- A. lowest cost to reach the next hop
- B. highest administrative distance
- C. lowest metric
- D. highest metric
- E. longest prefix match
DRAG DROP
–
Refer to the exhibit. The primary route across Gi0/0 is configured on both routers. A secondary route must be configured to establish connectivity between the workstation networks. Which command set must be configured to complete this task?
- A. R1 –
ip route 172.16.2.0 255.255.255.248 172.16.0.5 110R2 –
ip route 172.16.1.0 255.255.255.0 172.16.0.6 110 - B. R1 –
ip route 172.16.2.0 255.255.255.240 172.16.0.2 113R2 –
ip route 172.16.1.0 255.255.255.0 172.16.0.1 114 - C. R1 –
ip route 172.16.2.0 255.255.255.224 172.16.0.6 111R2 –
ip route 172.16.1.0 255.255.255.0 172.16.0.5 112 - D. R1 –
ip route 172.16.2.0 255.255.255.240 172.16.0.5 89R2 –
ip route 172.16.1.0 255.255.255.0 172.16.0.6 89
Refer to the exhibit. The New York router must be configured so that traffic to 2000::1 is sent primarily via the Atlanta site, with a secondary path via Washington that has an administrative distance of 2. Which two commands must be configured on the New York router? (Choose two.)
- A. ipv6 route 2000::1/128 2012::1
- B. ipv6 route 2000::1/128 2012::1 5
- C. ipv6 route 2000::1/128 2012::2
- D. ipv6 route 2000::1/128 2023::2 5
- E. ipv6 route 2000::1/128 2023::3 2