Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Refer to the exhibit. If OSPF Is running on this network, how does Router2 handle traffic from Site B to 10.10.13.128/25 at Site A?
A. It load-balances traffic out of Fa0/1 and Fa0/2.
B. It is unreachable and discards the traffic.
C. It sends packets out of interface FaO/2.
D. It sends packets out of interface Fa0/1.
What is the purpose of traffic shaping?
A. to mitigate delays over slow links
B. to provide fair queuing for buffered flows
C. to limit the bandwidth that a flow can use to
D. be a marking mechanism that identifies different flows
Refer to the exhibit. Which command configures a floating static route to provide a backup to the primary link?
A. ip route 0.0.0.0 0.0.0.0 209.165.202.131
B. ip route 209.165.201.0 255.255.255.224 209.165.202.130
C. ip route 0.0.0.0 0.0.0.0 209.165.200.224
D. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
Where does the configuration reside when a helper address is configured to support DHCP?
A. on the router closest to the server
B. on the router closest to the client
C. on every router along the path
D. on the switch trunk interface
How does the dynamically-learned MAC address feature function?
A. The CAM table is empty until ingress traffic arrives at each port
B. Switches dynamically learn MAC addresses of each connecting CAM table.
C. The ports are restricted and learn up to a maximum of 10 dynamically-learned addresses
D. It requires a minimum number of secure MAC addresses to be filled dynamically
What facilitates a Telnet connection between devices by entering the device name?
A. SNMP
B. DNS lookup
C. syslog
D. NTP
Drag and Drop Question
Drag the IPv6 DNS record types from the left onto the description on the right.
Drag and Drop Question
Drag and drop the SNMP components from the left onto the descriptions on the right.
Drag and Drop Question
Refer to the exhibit. An engineer is required to verify that the network parameters are valid for the users wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used.
Refer to the exhibit. An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0/1. Which access list must be applied?
A. ip access-list standard 99
permit 10.100.100.0 0.0.0.255
deny 192.168.0.0 0.0.255.255
B. ip access-list standard 99
permit 10.100.100.0 0.0.0.255
deny 192.168.0.0 0.255.255.255
C. ip access-list standard 199
permit 10.100.100.0 0.0.0.255
deny 192.168.0.0 0.255.255.255
D. ip access-list standard 199
permit 10.100.100.0 0.0.0.255
deny 192.168.0.0 0.0.255.255