Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Where is the interface between the control plane and data plane within the software-defined architecture?
A. control layer and the infrastructure layer
B. application layer and the infrastructure layer
C. application layer and the management layer
D. control layer and the application layer
An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?
A. hypervisor
B. router
C. straight cable
D. switch
A network analyst is tasked with configured the date and time on a router using EXEC mode. The date must be set to 12:00am. Which command should be used?
A. Clock timezone
B. Clock summer-time-recurring
C. Clock summer-time date
D. Clock set
Refer to the exhibit. What is the subnet mask of the route to the 10.10.13.160 prefix?
A. 255.255.255.240
B. 255.255.255.128
C. 255.255.248.0
D. 255.255.255.248
A network administrator is asked to configure VLANS 2, 3 and 4 for a new implementation. Some ports must be assigned to the new VLANS with unused remaining. Which action should be taken for the unused ports?
A. configure port in the native VLAN
B. configure ports in a black hole VLAN
C. configure in a nondefault native VLAN
D. configure ports as access ports
Refer to the exhibit. Router R4 is dynamically learning the path to the server. If R4 is connected to R1 via OSPF Area 20, to R2 via R2 BGP, and to R3 via EIGRP 777, which path is installed in the routing table of R4?
A. the path through R1, because the OSPF administrative distance is 110
B. the path through R2. because the IBGP administrative distance is 200
C. the path through R2 because the EBGP administrative distance is 20
D. the path through R3. because the EIGRP administrative distance is lower than OSPF and BGP
Why was the RFC 1918 address space defined?
A. conserve public IPv4 addressing
B. preserve public IPv6 address space
C. reduce instances of overlapping IP addresses
D. support the NAT protocol
Which HTTP status code is returned after a successful REST API request?
A. 200
B. 301
C. 404
D. 500
Refer to the exhibit. R5 is the current DR on the network, and R4 is the BDR. Their interfaces are flapping, so a network engineer wants the OSPF network to elect a different DR and BDR. Which set of configurations must the engineer implement?
A. R4(config)#interface gi0/0
R4(config-if)#ip ospf priority 20
R5(config)#interface gi0/0
R5(config-if)#ip ospf priority 10
B. R5(config)#interface gi0/0
R5(config-if)#ip ospf priority 120
R4(config)#interface gi0/0
R4(config-if)#ip ospf priority 110
C. R3(config)#interface gi0/0
R3(config-if)#ip ospf priority 255
R2(config)#interface gi0/0
R2(config-if)#ip ospf priority 240
D. R2(config)#interface gi0/0
R2(config-if)#ip ospf priority 259
R3(config)#interface gi0/0
R3(config-if)#ip ospf priority 256
What are network endpoints?
A. act as routers to connect a user to the service prowler network
B. a threat to the network if they are compromised
C. support inter-VLAN connectivity
D. enforce policies for campus-wide traffic going to the internet