Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
When a client and server are not on the same physical network, which device is used to forward requests and replies between client and server for DHCP?
A. DHCP relay agent
B. DHCP server
C. DHCPDISCOVER
D. DHCPOFFER
Drag and Drop Question
Drag and drop the functions of DHCP from the left onto any of the positions on the right Not all
functions are used.
Which plane is centralized by an SON controller?
A. management-plane
B. control-plane
C. data-plane
D. services-plane
An engineer configures interface Gi1/0 on the company PE router to connect to an ISP Neighbor discovery is disabled.
Which action is necessary to complete the configuration if the ISP uses third-party network devices?
A. Enable LLDP globally
B. Disable autonegotiation
C. Disable Cisco Discovery Protocol on the interface
D. Enable LLDP-MED on the ISP device
What is the benefit of configuring PortFast on an interface?
A. After the cable is connected, the interface uses the fastest speed setting available for that cable type
B. After the cable is connected, the interface is available faster to send and receive user data C. The frames entering the interface are marked with higher priority and then processed faster by a switch.
D. Real-time voice and video frames entering the interface are processed faster
Drag and Drop Question
Drag and drop the DNS lookup components from the left onto the functions on the right
Drag and Drop Question
Drag and drop the statement about networking from the left into the Corresponding networking types on the right. Not all statements are used.
Drag and Drop Question
Drag and drop the IPv6 address type characteristics from the left to the right.
Refer to the exhibit. Between which zones do wireless users expect to experience intermittent connectivity?
A. between zones 1 and 2
B. between zones 2 and 5
C. between zones 3 and 4
D. between zones 3 and 6
Refer to the exhibit. A network engineer is in the process of establishing IP connectivity between two sites.
Routers R1 and R2 are partially configured with IP addressing.
Both routers have the ability to access devices on their respective LANs.
Which command set configures the IP connectivity between devices located on both LANs in each site?
A. R1
ip route 192.168.1.1 255.255.255.0 GigabitEthernet0/1
R2
ip route 10.1.1.1 255.255.255.0 GigabitEthernet0/1
B. R1
ip route 192.168.1.0 255.255.255.0 GigabitEthernet0/0
R2
ip route 10.1.1.1 255.255.255.0 GigabitEthernet0/0
C. R1
ip route 0.0.0.0 0.0.0.0 209.165.200.225
R2
ip route 0.0.0.0 0.0.0.0 209.165.200.226
D. R1
ip route 0.0.0.0 0.0.0.0 209.165.200.226
R2
ip route 0.0.0.0 0.0.0.0 209.165.200.225