Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Which interface is used to send traffic to the destination network?
- A. F0/7
- B. F0/6
- C. F0/4
- D. F0/5
Which interface condition is occurring in this output?
- A. bad NIC
- B. broadcast storm
- C. duplex mismatch
- D. high throughput
SIMULATION
–
Guidelines
–
This is a lab item in which tasks will be performed on virtual devices
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window
• All necessary preconfigurations have been applied
• Do not change the enable password or hostname for any device
• Save your configurations to NVRAM before moving to the next item
• Click Next at the bottom of the screen to submit this lab and move to the next question
• When Next is clicked the lab closes and cannot be reopened
Topology
–
Tasks
–
All physical cabling is in place. A company plans to deploy 16 new sites. The sites will utilize both IPv4 and IPv6 networks.
1. Subnet 10.20.0.0/16 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet
– Assign the first usable IP address to e0/0 on Sw101
– Assign the last usable IP address to e0/0 on Sw102
2. Subnet 2001:db8::/52 to meet the subnet requirements and maximize the number of hosts
• Using the second subnet
– Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw101
– Assign an IPv6 GUA using a unique 64-Bit interface identifier on e0/0 on Sw102
Answer:
Refer to the exhibit. Which switch becomes the root bridge?
- A. SW 1 -Bridge Priority – 20480 –
mac-address 00:10:a1:71 :e3:35 - B. SW 2 –Bridge Priority – 20480 –
mac-address 00:10:a1:54:4e:50 - C. SW 3 -Bridge Priority – 57344 –
mac-address 00:10:a1:93:09:2d - D. SW 4 -Bridge Priority – 57344 –
mac-address 00:10:a1:57:61:80
How does a hub handle a frame traveling to a known destination MAC address differently than a switch?
- A. The hub forwards the frame to all ports, and a switch forwards the frame to the known destination.
- B. The hub forwards the frame to all ports in the FIB table, and a switch forwards the frame the destination MAC is known.
- C. The hub forwards the frame using the information in the MAC table, and a switch uses data in its routing table.
- D. The hub forwards the frame only to the port connected to the known MAC address, and a switch forwards the frame to all ports.
DRAG DROP
–
Refer to the exhibit. Drag and drop the learned prefixes from the left onto the preferred route methods from which they were learned on the right. Not all prefixes are used.
What is the purpose of an ESSID?
- A. It allows multiple access points to provide a common network for client connections.
- B. It supports fast roaming features such as 802.11 r, 802.11k, and 802.11v.
- C. It serves as the wireless MAC address of the access point.
- D. It provides greater security than a standard SSID.
Which port-security violation mode drops traffic from unknown MAC addresses and forwards an SNMP trap?
- A. shutdown VLAN
- B. protect
- C. restrict
- D. shutdown
DRAG DROP
–
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Which selections must be used on the WLC when implementing a RADIUS server for wireless authentication?
- A. Client Exclusion and SSH
- B. Network Access Control State and SSH
- C. AAA Override and the IP address of the server
- D. 802.1x and the MAC address of the server