We HELP you PASS (CCNP 350-401) Implementing Cisco Enterprise Network Core Technologies (ENCOR) certification, without exam and training!
***Pay after you Pass***
If a VRRP master router fails, which router is selected as the new master router?
- A. router with the lowest priority
- B. router with the highest priority
- C. router with the highest loopback address
- D. router with the lowest loopback address
Which two mechanisms are available to secure NTP? (Choose two.)
- A. IPsec
- B. IP prefix list-based
- C. encrypted authentication
- D. TACACS-based authentication
- E. IP access list-based
In OSPF, which LSA type is responsible for pointing to the ASBR router?
- A. type 1
- B. type 2
- C. type 3
- D. type 4
Which First Hop Redundancy Protocol maximizes uplink utilization and minimizes the amount of configuration that is necessary?
- A. GLBP
- B. HSRP v2
- C. VRRP
- D. HSRP v1
Refer to the exhibit.
Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
- A. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0
- B. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0
- C. R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.0.0.0 mask 255.0.0.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.0.0.0 mask 255.0.0.0
- D. R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#neighbor 10.2.2.2 update-source lo0 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#neighbor 10.1.1.1 update-source lo0 R2(config-router)#network 10.2.2.0 mask 255.255.255.0
Refer to the exhibit.
Which type of antenna do the radiation patterns present?
- A. Yagi
- B. patch
- C. omnidirectional
- D. dipole
Which reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?
- A. mismatched OSPF link costs
- B. mismatched OSPF network type
- C. mismatched areas
- D. mismatched MTU size
When configuring WPA2 Enterprise on a WLAN, which additional security component configuration is required?
- A. PKI server
- B. NTP server
- C. RADIUS server
- D. TACACS server
Refer to the exhibit.
The WLC administrator sees that the controller to which a roaming client associates has Mobility Role Anchor configured under Clients > Detail.
Which type of roaming is supported?
- A. indirect
- B. Layer 3 intercontroller
- C. intracontroller
- D. Layer 2 intercontroller
DRAG DROP –
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.
Select and Place:
