Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
Which command enables HTTP access to the Cisco WLC?
- A. config network telnet enable
- B. config network secureweb enable
- C. config certificate generate webadmin
- D. config network webmode enable
Refer to the exhibit. A network administrator configures an interface on a new switch so that it connects to interface Gi1/0/1 on switch Cat9300-1. Which configuration must be applied to the new interface?
- A. switchport mode trunk
switchport trunk native vlan 321
switchport trunk allowed vlan 100,200,300 - B. switchport mode dynamic desirable
switchport trunk native vlan 321
switchport trunk allowed vian 100,200,300 - C. switchport trunk encapsulation dot1q
switchport trunk native vlan 321
switchport trunk allowed vlan 100-300 - D. switchport nonegotiate
switchport access vlan 321
switchport trunk allowed vlan except 2-1001
SIP-based Call Admission Control must be configured in the Cisco WLC GUI. SIP call-snooping ports are configured. Which two actions must be completed next? (Choose two.)
- A. Set the QoS level to silver or greater for voice traffic.
- B. Configure two different QoS roles for data and voice traffic.
- C. Enable Media Session Snooping on the WLAN.
- D. Set the QoS level to platinum for voice traffic.
- E. Enable traffic shaping for the LAN interface of the WLC.
Refer to the exhibit. Routers R1, R2, and R3 use a protocol to identify the neighbors’ IP addresses, hardware platforms, and software versions. A network engineer must configure R2 to avoid sharing any neighbor information with R3, and maintain its relationship with R1. What action meets this requirement?
- A. Configure the no lldp receive command on g0/1.
- B. Configure the no cdp run command globally.
- C. Configure the no cdp enable command on g0/2.
- D. Configure the no lldp run command globally.
Refer to the exhibit. A multivendor network exists and the company is implementing VoIP over the network for the first time. Which configuration is needed to implement the neighbor discovery protocol on the interface and allow it to remain off for the remaining interfaces?
- A. SW1(config)#lldp run –
SW1(config)#interface gigabitethernet1/0/1
SW1(config-if)#lldp enable - B. SW1(config)#no cdp run –
SW1(config)#interface gigabitethernet1/0/1SW1(config-if)#lldp transmit –
SW1(config-if)#lldp receive - C. SW1(contig)#lldp enable –
SW1(config)#interface gigabitethernet1/0/1
SW1(config-if)#lldp run - D. SW1(config)#no cdp enable –
SW1(config)#interface gigabitethernet1/0/1
SW1(config-if)#cdp run
Refer to the exhibit. The P2P Blocking Action option is disabled on the WLC. The security team has a new requirement for each client to retain their assigned IP addressing as the clients move between locations in the campus network. Which action completes this configuration?
- A. Enable the Static IP Tunneling option.
- B. Disable the Coverage Hole Detection option.
- C. Set the P2P Blocking Action option to Forward-UpStream.
- D. Check the DHCP Addr. Assignment check box.
A network administrator plans an update to the WI-FI networks in multiple branch offices. Each location is configured with an SSID called “Office”. The administrator wants every user who connects to the SSID at any location to have the same access level. What must be set the same on each network to meet the requirement?
- A. radio policy
- B. profile name
- C. NAS-ID configuration
- D. security policies
Refer to the exhibit. A network engineer is configuring a wireless LAN with Web Passthrough Layer 3 Web Policy. Which action must the engineer take to complete the configuration?
- A. Set the Layer 2 Security to 802.1X.
- B. Enable TKIP and CCMP256 WPA2 Encryption.
- C. Enable the WPA Policy.
- D. Set the Layer 2 Security to None.
Which two functions does a WLC perform in the lightweight access-point architecture that an AP performs independently in an autonomous architecture? (Choose two.)
- A. managing RF channels, including transmission power
- B. handling the association, authentication, and roaming of wireless clients
- C. sending and processing beacon frames
- D. encrypting and decrypting traffic that uses the WAP protocol family
- E. preventing collisions between wireless clients on the same RF channel
Refer to the exhibit. A Cisco engineer creates a new WLAN called lantest. Which two actions must be performed so that only high-speed 2.4-Ghz clients connect? (Choose two.)
- A. Enable the Status option.
- B. Set the Radio Policy option to 802.11g Only.
- C. Set the Radio Policy option to 802.11a Only.
- D. Set the Interface/Interface Group(G) to an interface other than guest.
- E. Enable the Broadcast SSID option.