Pass CCNA 200-301 in Just 3 Days – Stress-Free!
Get your CCNA 200-301 certification with 100% pass guarantee. Pay only after passing!
Click here to secure your guaranteed certification now!
Have questions? Contact us directly on WhatsApp for quick support!
DRAG DROP –
Drag and drop the TCP/IP protocols from the left onto their primary transmission protocols on the right.
Select and Place:
An engineer observes high usage on the 2.4GHz channels and lower usage on the 5GHz channels. What must be configured to allow clients to preferentially use
5GHz access points?
- A. Client Band Select
- B. Re-Anchor Roamed Clients
- C. OEAP Spilt Tunnel
- D. 11ac MU-MIMO
Which networking function occurs on the data plane?
- A. processing inbound SSH management traffic
- B. sending and receiving OSPF Hello packets
- C. facilitates spanning-tree elections
- D. forwarding remote client/server traffic
Under which condition is TCP preferred over UDP?
- A. UDP is used when low latency is optimal, and TCP is used when latency is tolerable.
- B. TCP is used when dropped data is more acceptable, and UDP is used when data is accepted out-of-order.
- C. TCP is used when data reliability is critical, and UDP is used when missing packets are acceptable.
- D. UDP is used when data is highly interactive, and TCP is used when data is time-sensitive.
Refer to the exhibit. Shortly after SiteA was connected to SiteB over a new single-mode fiber path, users at SiteA report intermittent connectivity issues with applications hosted at SiteB. What is the cause of the intermittent connectivity issue?
- A. Interface errors are incrementing.
- B. High usage is causing high latency.
- C. An incorrect SFP media type was used at SiteA.
- D. The sites were connected with the wrong cable type.
A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2 GigabitEthernet1/1 interface. For the configuration to be applied, the engineer must compress the address 2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?
- A. ipv6 address 2001::db8:0000::500:a:400F:583B
- B. ipv6 address 2001:db8:0::500:a:4F:583B
- C. ipv6 address 2001:db8::500:a:400F:583B
- D. ipv6 address 2001:0db8::5:a:4F:583B
What is a network appliance that checks the state of a packet to determine whether the packet is legitimate?
- A. Layer 2 switch
- B. LAN controller
- C. load balancer
- D. firewall
What is a role of access points in an enterprise network?
- A. integrate with SNMP in preventing DDoS attacks
- B. serve as a first line of defense in an enterprise network
- C. connect wireless devices to a wired network
- D. support secure user logins to devices on the network
An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?
- A. router
- B. hypervisor
- C. switch
- D. straight cable
How does a Cisco Unified Wireless Network respond to Wi-Fi channel overlap?
- A. It allows the administrator to assign the channels on a per-device or per-interface basis.
- B. It segregates devices from different manufactures onto different channels.
- C. It analyzes client load and background noise and dynamically assigns a channel.
- D. It alternates automatically between 2.4 GHz and 5 GHz on adjacent access points.